Standard Pump Industrial Drum Pumps

Industrial Pump Tubes

Our complete range of pump tubes provide an ideal solution for applications ranging from corrosive chemicals to light oils. Pump tubes are available in Polypropylene, PVDF, CPVC, Stainless Steel and Aluminum.

Centrifugal | Polypropylene

Engineered for transferring a variety of corrosive liquids.  Robust Polypropylene ensures chemical resistance against light to aggressive chemicals.

Applications

  • Acetic Acid
  • Sulfuric Acid
  • Hydrochloric Acid (20%)
  • Nitric Acid (20%)
  • Alkalis
  • Ferric Chloride

image

Not suitable for pumping flammable or combustible liquids.

Centrifugal | Stainless Steel

Centrifugal | CPVC

Engineered for transferring corrosive chemicals associated with the water treatment industry. Robust CPVC offers excellent durability and chemical resistance.

Applications

  • Sodium Hypochlorite
  • Calcium Chloride
  • Potassium Hydroxide
  • Calcium Hydroxide
  • Chlorinated Water
  • Sodium Bromide
Technical Docs

image

Not suitable for pumping flammable or combustible liquids.

Centrifugal | PVDF

Engineered for transferring highly concentrated and aggressive liquids. Robust PVDF offers excellent durability and chemical resistance.

Applications

  • Concentrated Nitric Acid
  • Propionic Acid
  • Hydrofluoric Acid
  • Sodium Hypoclorite
  • Sulfuric Acid-66
  • Stearic Acid

image

Not suitable for pumping flammable or combustible liquids.

Centrifugal | Aluminum

Engineered for transferring non-corrosive liquids such as machining oils, coolants and hydraulic fluid. Robust Aluminum construction offers excellent strength and durability.

Applications

  • Motor Oil (up to 30 wt)
  • Anti-Freeze
  • Lubricating Oils
  • Light Machining Oils
  • Hydraulic Fluid

image

Pumping of flammable or combustible liquids can generate a static electric discharge, causing fire or explosion resulting in injury or death. Read and understand operating instructions before starting this unit. Follow all federal, state and local safety codes including NFPA 30 – NFPA77. Prior to connecting to air supply, install bond and ground wires and check continuity of each wire. A meter reading of one ohm or less is required for safe liquid transfer. Use only approved metallic pump tube, explosion proof or air motor, metallic drum and receiving vessel when pumping flammables. Air motors are not recognized under any current Underwriter’s Laboratory listing program. Consult a qualified engineer for suitability for use in a hazardous area or on flammables.

Progressive Cavity | Planetary Gear

Engineered to transfer viscous materials from drums and intermediate bulk containers (IBC). The progressive cavity design delivers a continuous flow of material with little product degradation. Pumps are available with TEFC and Hazardous Duty motors. Maximum viscosity is 25,000 cps (mPas).

Applications
  • Polymers
  • Oil & Greases
  • Resins
  • Paints
  • Adhesives
  • Varnishes
Technical Docs

image

Pumping of flammable or combustible liquids can generate a static electric discharge, causing fire or explosion resulting in injury or death. Read and understand operating instructions before starting this unit. Follow all federal, state and local safety codes including NFPA 30 – NFPA77. Prior to connecting to air supply, install bond and ground wires and check continuity of each wire. A meter reading of one ohm or less is required for safe liquid transfer. Use only approved metallic pump tube, explosion proof or air motor, metallic drum and receiving vessel when pumping flammables. Air motors are not recognized under any current Underwriter’s Laboratory listing program. Consult a qualified engineer for suitability for use in a hazardous area or on flammables.

Progressive Cavity | Direct Drive

Engineered to transfer viscous materials from drums, intermediate bulk containers (IBC) and large storage vessels. Utilizing the principle of positive displacement, these pumps deliver a continuous flow of material with little product degradation. Pumps are available with a TEFC electric or air powered motors. Maximum viscosity is 100,000 cps (mPas).

Applications
  • Polymers
  • Oil & Greases
  • Resins
  • Paints
  • Adhesives
  • Varnishes
Technical Docs

image

Pumping of flammable or combustible liquids can generate a static electric discharge, causing fire or explosion resulting in injury or death. Read and understand operating instructions before starting this unit. Follow all federal, state and local safety codes including NFPA 30 – NFPA77. Prior to connecting to air supply, install bond and ground wires and check continuity of each wire. A meter reading of one ohm or less is required for safe liquid transfer. Use only approved metallic pump tube, explosion proof or air motor, metallic drum and receiving vessel when pumping flammables. Air motors are not recognized under any current Underwriter’s Laboratory listing program. Consult a qualified engineer for suitability for use in a hazardous area or on flammables.

Industrial Pump Motors

Standard Pump motors are designed to operate in the most demanding of environments. An extensive line of Explosion Proof, TEFC, Open Drip-Proof and Air motors provide durability and safety regardless of the environment.

Open Drip-Proof

Ideally suited for transferring acids and alkalies in corrosive environments. Available in fixed or variable speed control configurations.

Model Number Power Output lbs (kg)
SP-280P 110-120V/1/50-60Hz 1 hp (825 w) 10 (4,5)
SP-280P-V 110-120V/1/50-60Hz 1 hp (825 w) 10 (4,5)
SP-280P-2 220-240V/1/50-60Hz 1 hp (825 w) 10 (4,5)
SP-280P-2-V 220-240V/1/50-60Hz 1 hp (825 w) 10 (4,5)
SP-280P-2NL 220-240V/1/50-60Hz 1 hp (825 w) 10 (4,5)
SP-280P-2-VNL 220-240V/1/50-60Hz 1 hp (825 w) 10 (4,5)

Technical Docs

imageNot suitable for pumping flammable or combustible liquids.

TEFC

Engineered for use in heavily corrosive environments or when aggressive fumes are present. Ideally suited for transferring concentrated acids and alkalies.

Model Number Power Output lbs (kg)
SP-ENC 110-120V/1/50-60Hz 1 hp (825 w) 13 (5,9)
SP-ENC-V 110-120V/1/50-60Hz 1 hp (825 w) 13 (5,9)
SP-ENC-2 220-240V/1/50-60Hz 1 hp (825 w) 13 (5,9)
SP-ENC-2-V 220-240V/1/50-60Hz 1 hp (825 w) 13 (5,9)
SP-ENC-2NL 220-240V/1/50-60Hz 1 hp (825 w) 13 (5,9)
SP-ENC-2-VNL 220-240V/1/50-60Hz 1 hp (825 w) 13 (5,9)

image

Not suitable for pumping flammable or combustible liquids.

Explosion-Proof

Air | 1/2 hp

Engineered for use in heavily corrosive environments or when aggressive fumes are present. Ideally suited for transferring flammable / combustible liquids

Air | 3/4 hp

Air | Flange Mount

Ideal for environments in which electricty is not an option. Engineered for chemical applications and flammable / combustible liquids.

Model Number Air Consumption Output lbs (kg)
SP-A4 80 CFM (37 l/sec) @ 100 psi (7 bar) 2 hp (1,5 kw) 12 (5,4)
SP-A6 130 CFM (65 l/sec) @ 100 psi (7 bar) 4 hp (3,0 kw) 24 (11,0)
SP-A8 170 CFM (80 l/sec) @ 100 psi (7 bar) 5 hp (3,7 kw) 26 (11.8)

image

Pumping of flammable or combustible liquids can generate a static electric discharge, causing fire or explosion resulting in injury or death. Read and understand operating instructions before starting this unit. Follow all federal, state and local safety codes including NFPA 30 – NFPA77. Prior to connecting to air supply, install bond and ground wires and check continuity of each wire. A meter reading of one ohm or less is required for safe liquid transfer. Use only approved metallic pump tube, explosion proof or air motor, metallic drum and receiving vessel when pumping flammables. Air motors are not recognized under any current Underwriter’s Laboratory listing program. Consult a qualified engineer for suitability for use in a hazardous area or on flammables.

TEFC | 3 Phase

Ideal for general industrial use. The totally enclosed fan cooled design is engineered for use in dusty environments or where corrosive fumes are present.

Model Number Power Output lbs (kg)
SP-502 190/380//230/460/3/50-60 Hz 3/4 hp (0,56 kw) 56 (25,5)
SP-522 190/380//230/460/3/50-60 Hz 1 1/2 hp (1,1 kw) 78 lbs (35,5)

Applications

  • Chemical, Oil, & Gas
  • Food & Beverage
  • Paper and Pulp

Features

  • TEFC (IP55) enclosure
  • Heavy-gauge steel and gasketed conduit boxes
  • UL and CSA certified

image

Not suitable for pumping flammable or combustible liquids.

Industrial Pump Packages

The package concept bundles complimentary products to create an out-of-the-box solution.  Each package includes: motor, pump tube, discharge hose, barrel adapter, storage bracket and a hand nozzle.

Package 1 | CPVC

Engineered to transfer corrosive chemicals associated with the Water Treatment industry.

Applications

  • Sodium Hypochlorite
  • Calcium Chloride
  • Potassium Hydroxide
  • Calcium Hydroxide
  • Chlorinated Water
  • Sodium Bromide
Technical Docs

image

Not suitable for pumping flammable or combustible liquids.

Package 2 | Polypropylene

Engineered to transfer corrosive chemicals.

Applications

  • Hydrochloric Acid
  • Acetic Acid
  • Sulfuric Acid
  • Nitric Acid (20%)
Technical Docs

image

Not suitable for pumping flammable or combustible liquids.

Package 3 | PVDF

Engineered to transfer concentrated and extremely aggressive chemicals.

Applications

  • Sulfuric Acid – 66 Baume
  • Concentrated Nitric Acid
  • Hydrofluoric Acid
  • Propionic Acid
Technical Docs

image

Not suitable for pumping flammable or combustible liquids.

Package 4 | Polypropylene – Meter

Engineered to safely measure and dispense corrosive chemicals.

Applications
  • Hydrochloric Acid
  • Acetic Acid
  • Sulfuric Acid
  • Nitric Acid (20%)
Technical Docs

image

Not suitable for pumping flammable or combustible liquids.

Package 5 | PVDF – Meter

Engineered to safely measure and dispense corrosive chemicals.

Applications

  • Sulfuric Acid 66 baume
  • Concentrated Nitric (98%)
  • Hydrofluoric Acid
  • Propionic Acid
Technical Docs

image

Not suitable for pumping flammable or combustible liquids.

Package 6 | Stainless Steel

Engineered to transfer mineral acids and suitable chemicals.

Applications

  • Nitric Acid
  • Citric Acid
Technical Docs

image

Not suitable for pumping flammable or combustible liquids.

Package 7 | Aluminum

Engineered to transfer light oils, automotive fluids and lubricants.

Applications
  • Light Machining Oils
  • Hydraulic Fluid
  • Motor Oil (Up to 30 wt.)
  • Anti-Freeze
  • Lubricating Oil
Technical Docs

image

Not suitable for pumping flammable or combustible liquids.

Package 8 | EXP – Air

Designed for transferring flammable/combustible liquids and meets the stringent safety requirements of the chemical processing industry.

Applications
  • Alcohol
  • Isopropyl Ether
  • Aqueous Ammonia
  • Xylene
  • Petroleum Products
  • Gasoline
  • Toluene​
  • Solvents
Technical Docs

image

Pumping of flammable or combustible liquids can generate a static electric discharge, causing fire or explosion resulting in injury or death. Read and understand operating instructions before starting this unit. Follow all federal, state and local safety codes including NFPA 30 – NFPA77. Prior to connecting to air supply, install bond and ground wires and check continuity of each wire. A meter reading of one ohm or less is required for safe liquid transfer. Use only approved metallic pump tube, explosion proof or air motor, metallic drum and receiving vessel when pumping flammables. Air motors are not recognized under any current Underwriter’s Laboratory listing program. Consult a qualified engineer for suitability for use in a hazardous area or on flammables.

Package 9 | EXP – Electric

Designed for transferring flammable/combustible liquids and meets the stringent safety requirements of the chemical processing industry.

Applications

  • Alcohol
  • Solvents
  • Xylene
  • Isopropyl Ether
  • Aqueous Ammonia
  • Petroleum Products
Technical Docs

image

Pumping of flammable or combustible liquids can generate a static electric discharge, causing fire or explosion resulting in injury or death. Read and understand operating instructions before starting this unit. Follow all federal, state and local safety codes including NFPA 30 – NFPA77. Prior to connecting to air supply, install bond and ground wires and check continuity of each wire. A meter reading of one ohm or less is required for safe liquid transfer. Use only approved metallic pump tube, explosion proof or air motor, metallic drum and receiving vessel when pumping flammables. Air motors are not recognized under any current Underwriter’s Laboratory listing program. Consult a qualified engineer for suitability for use in a hazardous area or on flammables.

Package 10 | EXP – Air

Designed for transferring flammable/combustible liquids and meets the stringent safety requirements of the chemical processing industry.

Applications

  • Alcohol
  • Isopropyl Ether
  • Aqueous Ammonia
  • Xylene
  • Petroleum Products
  • Gasoline
  • Toluene​
  • Solvents
Technical Docs

image

Pumping of flammable or combustible liquids can generate a static electric discharge, causing fire or explosion resulting in injury or death. Read and understand operating instructions before starting this unit. Follow all federal, state and local safety codes including NFPA 30 – NFPA77. Prior to connecting to air supply, install bond and ground wires and check continuity of each wire. A meter reading of one ohm or less is required for safe liquid transfer. Use only approved metallic pump tube, explosion proof or air motor, metallic drum and receiving vessel when pumping flammables. Air motors are not recognized under any current Underwriter’s Laboratory listing program. Consult a qualified engineer for suitability for use in a hazardous area or on flammables.

Industrial Accessories

Customize your industrial Drum Pump with selection of accessories. Hand Nozzles provide a safe solution for controlling and dispensing corrosive chemicals.  Barrel Adapters vertically stabilize pumps in drums and Fume Barriers reduce aggressive fumes in the atmosphere.

Pump Hanger

The pump hanger is designed for attaching your pump to an overhead lifting device such as a winch.

Model Number Material Description
743 SS 316 Engineered to vertically stabilize pump in open top containers

Wall Bracket

The Stainless Steel Wall Bracket provides an ideal solution for storing your Drum pump when not in use. Simply secure the bracket to the wall and hang the pump from the Hand Wheel.

Model Number Material Description
9006 SS 304 Ideal for Drum Pump Storage

Quick Disconnect

The Polypropylene Quick Disconnect is designed to allow pump operators to remove discharge hoses quickly and safely.

Model Number Material Description
125A100C Polypropylene 1 1/4″ Thread x 1″ Barb (28 mm x 25mm)

Suction Strainers

The chemically resistant Suction Strainers are designed to prevent particulates from entering the pump intake and damaging internal components.

Model Number Material Mesh Dimensions
9011 Polypropylene .63″ x .098″ (16×2,5 mm)
7012 SS316 .58″ x .051″ (14,7×1,3 mm)
9043 PVDF .63″ x .098″ (16×2,5 mm)

Fume Barriers

Chemically resistant Fume Barriers are ideal for applications where aggressive fumes are present. The sealed design contains 99% of aggressive fumes within the drum.

Model Number Material Description
9018 Polypropylene 2″ O.D. (51 mm), EPDM Seal
8804 SS 304 2″ O.D. (51 mm), EPDM Seal

Barrel Adapters

Chemically resistamt Barrel Adapters are designed to vertically stablize your pump in a 2″ (50mm) bung.

Model Number Material Description
9015 Polypropylene 2″ O.D. (51 mm)
8802 SS 304 2″ O.D. (51 mm)

Discharge Hoses

Model Number Material Description
9029 Clear PVC 1″ I.D. x 1.25″ O.D. (25 mm x 32 mm)
Max Temperature: 150ºF (66ºC)
Max Operating Pressure: 30 psi (2,1 bar)
Material of Construction: Polyvinyl Chloride
9032 Clear Braided PVC 1″ I.D. x 1.25″ O.D. (25 mm x 32 mm)
Max Temperature: 150ºF (66ºC)
Max Operating Pressure: 75 psi (5,2 bar)
Material of Construction: Poly-Braid Polyvinyl Chloride
9034 Goodyear® FabChem™ 1″ (25 mm) I.D. x 1.47 O.D. (25 mm x 37 mm)
Max Temperature: 150ºF (66ºC)
Max Operating Pressure: 200 psi (14 bar)
Material of Construction: Ultra High Molecular Weight Polyethylene
Note: Designed to be Used for Flammable / Combustible Liquids
9044 Goodyear® Viper 16™ 1″ (25 mm) I.D. x 1.45″ O.D. (25 mm x 37 mm)
Max Temperature: 250ºF (121ºC)
Max Operating Pressure: 200 psi (14 bar)
Material of Construction: Modified Cross-Linked Polyethylene

Hand Nozzles

Model Number Housing Material Hose Barb Size Seal Material
9070 Polypropylene 1″ (25 mm) Viton
9071 Polypropylene 3/4″ (19 mm) Viton
9070e Polypropylene 1″ (25 mm) EPDM
9071e Polypropylene 3/4″ (19 mm) EPDM
9090 PVDF 1″ (25 mm) Viton
9091 PVDF 3/4″ (19 mm) Viton
9090e PVDF 1″ (25 mm) EPDM
9091e PVDF 3/4″ (19 mm) EPDM
9026 SS316 1″ (25 mm) PTFE
9030 Aluminum 1″ (25 mm) Buna
​9030-075 Aluminum 3/4″ (19 mm) Buna

Industrial Pump Lifts

Battery powered Lift is designed for raising / lowering pumps into drums and tanks. The mobile lift system is ideal for moisture-free environments or where electronic components are protected from overspray and cleaning agents.

Pump Lift | Dry Environment

Our lightweight and mobile design enables operators to move the Lift throughout their facility.  Ideal for drums, kettles and Tote tanks® as well as vessels with hygienic liners. The robust design can accommodate a 125 lb pump and can handle viscosities up to 100,000 cps.

Applications

  • Drums
  • Tote Tanks®
  • Mixing Tanks
  • Kettles

Features

  • Ideal for Dry Environments
  • Lightweight and Mobile
  • Rechargeable Battery Pack
  • Detachable Hand Control
  • Foot Activated Brake

Technical Docs

DEF Pumps

Engineered to transfer Diesel Exhaust Fluid (DEF) / AdBlue directly from drums and intermediate bulk containers (IBC).  These pumps meet stringent North American and European safety standards. Packages include: pump tube, variable speed motor, dispensing nozzle, discharge hose and a barrel adapter.

Package 1 | Electric – Auto Nozzle

Engineered to transfer AdBlue (AUS32) Diesel Exhaust Fluid (DEF) directly from barrels, drums and Intermediate Bulk Containers (IBC). Pump Packages are UL and CE listed to meet stringent North American (UL) and European (CE) safety standards. Electric Drum Pumps Packages include sealless pump, variable speed motor, dispensing nozzle (manual or auto-shut off), compatible hose and barrel adapter.

Applications

  • Diesel Exhaust Fluid

image

Not suitable for pumping flammable or combustible liquids.

Package 2 | Electric – Manual Nozzle

Engineered to transfer AdBlue (AUS32) Diesel Exhaust Fluid (DEF) directly from barrels, drums and Intermediate Bulk Containers (IBC). Pump Packages are UL and CE listed to meet stringent North American (UL) and European (CE) safety standards. Packages include sealless pump, variable speed motor, dispensing nozzle (manual or auto-shut off), compatible hose and barrel adapter.

Applications
  • Diesel Exhaust Fluid
Technical Docs

image

Not suitable for pumping flammable or combustible liquids.

Package 3 | Electric – Auto Nozzle – Meter

Engineered to transfer AdBlue (AUS32) Diesel Exhaust Fluid (DEF) directly from barrels, drums and Intermediate Bulk Containers (IBC). Pump Packages are UL and CE listed to meet stringent North American (UL) and European (CE) safety standards. Packages include sealless pump, variable speed motor, dispensing nozzle (manual or auto-shut off), compatible hose and barrel adapter.

Applications
  • Diesel Exhaust Fluid
Technical Docs

image

Not suitable for pumping flammable or combustible liquids.

Package 4 | Air – Auto Nozzle

Engineered to transfer AdBlue (AUS32) Diesel Exhaust Fluid (DEF) directly from barrels, drums and Intermediate Bulk Containers (IBC). Pump Packages are UL and CE listed to meet stringent North American (UL) and European (CE) safety standards. Diesel Exhaust Fluid Pump Packages include sealless pump, variable speed motor, dispensing nozzle (manual or auto-shut off), compatible hose and barrel adapter.

Applications
  • Diesel Exhaust Fluid
Technical Docs

image

Not suitable for pumping flammable or combustible liquids.

Package 5 | Air – Manual Nozzle

Engineered to transfer AdBlue (AUS32) Diesel Exhaust Fluid (DEF) directly from barrels, drums and Intermediate Bulk Containers (IBC). Pump Packages are UL and CE listed to meet stringent North American (UL) and European (CE) safety standards. Packages include sealless pump, variable speed motor, dispensing nozzle (manual or auto-shut off), compatible hose and barrel adapter.

Applications
  • Diesel Exhaust Fluid
Technical Docs

image

Not suitable for pumping flammable or combustible liquids.

Package 6 | Air – Auto Nozzle – Meter

Engineered to transfer AdBlue (AUS32) Diesel Exhaust Fluid (DEF) directly from barrels, drums and Intermediate Bulk Containers (IBC). Pump Packages are UL and CE listed to meet stringent North American (UL) and European (CE) safety standards. Packages include sealless pump, variable speed motor, dispensing nozzle (manual or auto-shut off), compatible hose and barrel adapter.

Applications
  • Diesel Exhaust Fluid
Technical Docs

image

Not suitable for pumping flammable or combustible liquids.

DEF Accessories

Discharge Hose

DEF CarboBlue Discharge Hose

Model Number Material Description
9110 EPDM CarboBlue Discharge Hose, 3/4″ (19 mm) ID

Hand Nozzles

Model Number Material Description
9111 Stainless Steel Auto Shut-Off Hand Nozzle, 3/4″ (19 mm) Hose Barb
9113 Polyethylene, Stainless Steel Manual Hand Nozzle, 3/4″ (19 mm) Hose Barb

Motors

Motor options for DEF drum pump packages include Air and 110V or 220V Electric.

Model Number Power Output lbs (kg)
SP-A1 Air 1/2 hp (370 w) 2.7 (1,2)
SP-280P-V 110-120V/1/50-60Hz 1 hp (825 w) 10 (4,5)
SP-280P-2-V 220-240V/1/50-60Hz 1 hp (825 w) 10 (4,5)

Flow Meter

DEF Turbine Flow Meter

Model Number Material Description
9112 Polyamide, Polypropylene Turbine Flow Meter

Features

  • Turbine Measuring Principle
  • Polyamide Housing
  • Polypropylene Turbine
  • LCD Display
  • Resettable Totalizer
  • Accuracy within +/- 1% of flow range

Drum Pump Tubes

DEF Drum Pump Tube

Model Number Material Description
9100 Polypropylene, SS316, Carbon Graphite, PTFE DEF Drum Pump Tube, 39″ (1000 mm) Immersion Length
9103 Polypropylene, SS316, Carbon Graphite, PTFE DEF Drum Pump Tube, 50″ (1120 mm) Immersion Length

Features

  • Immersion lengths available for Drums or IBC’s
  • Sealless Design
  • Run Dry Capabilities
  • Dead Head Capabilities
  • Robust Design

image

Not suitable for pumping flammable or combustible liquids.