Products
ROTAN® GP Internal Gear Pump
DESMI ROTAN Industrial Pump ROTAN Internal Gear Pump – ROTAN® GP Internal Gear Pump
Simple and compact construction for non-abrasive liquids.
General Purpose Internal gear pumps in cast iron, for clean, non-abrasive liquids. The simple and compact construction makes it a low-cost pump, often used in modified versions by OEM customers.
A close-coupled OEM model is also available. GP pumps are designed for use with IEC or NEMA flange motors.
Overview
Downloads
Overview
Pumping of:
- Clean oil
- Glycol
- Vegetable oil
- Solvents
- Lube oil
- Waste oil
- Fish oil
Key features and benefits
- Flexible sealing options.
- Opposing inlet and outlet connections with oversized ports.
- Shaft supported by two ball bearings in single sealed configuration.
- Self-priming with large suction capabilities.
- Low NPSH requirements.
- Self-draining, integral safety relief valve.
- No speed reduction required in six smaller sizes.
- Complete heating/cooling jacketing available.
| Capacity Range: | Up to 50 m3/h / 220 gpm |
| Speed: | Up to 1750 rpm |
| Differential Pressure: | Up to 16 bar / 232 psi |
| Suction Lift: | Up to 0,5 bar / 7.25 psi vacuum while priming Up to 0,8 bar / 11.6 psi vacuum while pumping |
| Viscosity Range: | Up to 7500 cSt |
| Temperature: | Up to 150°C / 302° F |
Downloads
